Beer Forced thermostats

For the beer forcing test we offer a special heat-cooling thermostat. The device is equipped with a programmer for automatic temperature cycles. Temperature changes between 0 and 60 ° C in the cycle time of 24 hours, an artificial aging of the beer is effected.

All models comply with safety class III (FL). The housing and all parts in contact with the fluid are made of high quality stainless steel.

  • Working temperature range: -40 ° C to 80 ° C
  • Heating capacity: 2.0 kW
  • Cooling capacity max. kW: 1.2 @ 20 ° C

Calibration baths | Unical

Calibration baths are used in quality assurance in industry and research. The modular concept is based on the combination of a calibration bath with a Unistat. This determines the temperature range and the temperature change speed. The calibration bath made of stainless steel is constructed in the manner of a calorimeter and allows good homogeneity. For calibration of measuring
and control probes offer calibration baths with a diameter of 118 millimeters and a bath depth of 384 millimeters. The calibration room is freely accessible and symmetrical. The top edge is designed for thread bearing with glass thermometers and on the other hand forms a tight seal for customer-specific bath covers.

  • Working temperature range: -100 ° C to 400 ° C
  • Volume: 7 liters

Circulation Heaters | Hotbox HB

Circulation heaters with CC-Pilot for temperature control of externally open systems in a compact design and suitable for installation in systems. With circulation pump made of stainless steel. Adjustable over-temperature protection according to DIN 12876.

  • Working temperature range: 45 ° C to 250 ° C
  • Heating capacity: 4.5 to 12 kW

Circulation heat exchanger | HTS

Heat exchanger system HTS with circulation pump and CC-Pilot controller for primary connection to an existing cooling water supply. These compact chillers provide a cooling circuit with stable pressure and flow and precise adjustable working temperature. The cooling capacity is generated by a plate heat exchanger via the connected cooling water. Since no active chiller is present, the devices are quiet and energy efficient and are a low-cost alternative to conventional chillers. The HTS heat exchangers are suitable for the exact temperature control of external applications such. Peltier elements, bioreactors, etc.

  • Working temperature range: 3 ° C to 95 ° C
  • Pump capacity pressure: 8-33 L / min, 0.2-2.5 bar

Special equipment

The realization of customized special devices is one of our strengths. We have already successfully implemented customer projects in numerous sectors. Many customers value our flexibility and innovative strength with which we solve individual requirements.

If you need a temperature control solution specially adapted to your needs, then contact us. We would be pleased to advise you personally and present suitable solutions or show you already realized reference projects with comparable requirements.