The range of FitoTerm testing chambers offer the ideal solution for temperature testing, simulation and exposure to heat, temperature changes, aging and stress testing.
Ideal for research and development studies, quality control, production facilities and laboratory testing.
Easily programmable for different testing simulations, many helpful testing accessories,…
• Volume of the test room: 300, 500, 1’000 and 1’500 liters
• Temperature range: from -75°C to 180°C
• Temperature changing rate cooling: from 1,5 to 5 K/min
The thermal shock test chamber, Fitoterm 150 CTE2 has two independent chambers in the same chassis. The higher chamber supports heat tests up to +180ºC, with heating by means of electrical resistances and air circulation.
The lower chamber is for cold tests down to -80ºC, with dynamic ventilation at
+/- 2m/s for homogenization and uniformity of the temperature.
The thermal shock test is accomplished by the transfer betwen the two chambers,using an electromechanical elevator, with a transfer speed of +/- 5 seconds. It also incorporates a slowing down mechanical system to eliminate the vibrations.
• Volume of the test room: 150 liters
• Temperature range: -85°C to +200°C